Carpoly Polyurethane Coating

Detailed Product Description

Carpoly  Polyurethane Coating

General Description:

A high performance, two-component chemically-cured aliphatic urethane enamel for use in area where protection and maximum gloss & color retention are required.

Typical Uses:  

For use on properly prepared and primed steel, galvanized metal, aluminum, concrete floors. Ideal for use on exterior or interior structural steel, piping, metal buildings, control cabinetry, conveyors, pumps, storage tanks, motors, machinery, and transportation vehicles.

Advantages:

Ø      Excellent corrosion resistance

Ø      Outstanding resistance to mangle, chipping and scratching.

Ø      Excellent chemical resistance

Ø      Film of good hardness, anti-impact, abrasion. Can provide protect of long team

Ø      Excellent gloss & color retention, applicability for exterior

Ø      Easy applied by brush, roller, or spray

Color: White & Customer colors

Finish:   Gloss ,Matt

Reduction Solvent:  CP-9 and CP-17 Thinner

Clean-up  Solvent: CP-9 Thinner   

Specific Gravity:  1.26kg/l, varied with colors

VOC(EPA24): 378g/l, varied with colors

Solid by Volume: 56%, Theoretical, varied with colors

Theoretical Coverage at 1.0 Mil Dry:  17.5m²/kg

Recommended Film Thickness:  2.0-3.0 mils(50-75 microns) dry; 3.6~5.4 mils(90-135 microns) wet.

Substrate Temperature	4	16	27
Minimum Recoat Dry Hard Maximum Recoat	10 Hours >32 Hours	6 Hours 24 Hours	3 Hours 16 Hours
Self	2 Weeks	2 Weeks	2 Weeks

Ventilation, film thickness, humidity, thinning, and other factors can  influence the rate of dry.